TM 9-2510-247-13&P
0047 00
REMOVAL - Continued
NOTE
Tag and mark wires before removing.
Cut plastic cable ties as necessary.
2.
Disconnect eleven connectors (4) from connectors (5).
3.
Push eleven connectors (4) back on wires (6) and remove pins (7) and washers (8).
NOTE
Mark position of ground wire and screw to aid installation.
4.
Remove screw (9), lockwasher (10), and connector (11). Discard lockwasher.
5.
Remove two ground wires (12) from connector (11).
6.
Remove nut (13), lockwasher (14), and connector (15) from tow light tab (16).
7.
Remove eight wires (17) from connector (15).
8.
Remove eight pins (18) from wires (17). Discard pins.
Figure 84. Tow Light Assembly
0047 00-2
