TM 9-2510-247-13&P
0047 00
Composite Taillight Installation
1. Install two bumpers (1) on tube (2) with screws (3).
2. Install four bumpers (4) on two brackets (5) with four screws (6), new lockwashers (7), and
nuts (8).
3. Install two brackets (5) on tube (2) with screws (9), washers (10), and wingnuts (11).
4. Install two composite lights (12) on tube (2) with three screws (13) and new lockwashers (14).
NOTE
All three clearance lights are installed the same way.
5. Install gasket (15) and lampholder (16) on clearance light bracket (17) with four screws (18).
6. Install bulb (19) and lens (20) in lampholder (16) with two screws (21).
7. Install eight pins (22) on wires (23).
8. Install eight wires (23) in connector (24).
Figure 87. Taillight Assembly
0047 00-5
