TM 9-2510-247-13&P
0049 00
REMOVAL
NOTE
Perform step 3 ONLY IF strobe light assembly is damaged.
3. Remove four screws (5) from base plate mounting brackets (6). Remove strobe light
assembly from mounting brackets.
NOTE
Perform step 4 ONLY IF mounting bracket is damaged.
4. Remove three screws (7) and lockwashers (8) from mounting bracket (9). Remove mounting
NOTE
DO NOT touch bulb with bare hands. Body oil may shorten
the operating life of the bulb.
Use gloves (item 6, Appendix F) or a rag (item 10, WP 0085)
when handling bulbs.
BULB REMOVAL
1. Remove four screws (1) from cover (2). Remove cover from base plate (3).
2. Remove bulb securing clip (10) and bulb (11).
BULB INSTALLATION
1. Install bulb (11) and secure with bulb securing clip (10).
2.
Position cover (2) on base plate (3) and secure with four screws (1).
Figure 91. Strobe Light Assembly
0049 00-2