TM 9-2510-247-13&P
0049 00
INSTALLATION
NOTE
Both strobe light assemblies are installed the same way. Left side shown.
Perform step 1 ONLY IF mounting bracket was removed.
1. Feed strobe light wire (4) through mounting bracket (9). Position mounting bracket (9) on mast
assembly and secure with three screws (7) and new lockwashers (8).
NOTE
Perform step 2 ONLY IF strobe light assembly was removed.
2. Position strobe light assembly on base plate mounting brackets (6) and secure with four
screws (5).
3. Connect strobe light wire.
4. Position cover (2) on baseplate (3) and secure with four screws (1).
0049 00-3
