TM 9-2510-247-13&P
00053 00
GLADHAND REPLACEMENT.
REMOVAL, CLEANING, REPLACEMENT, INSTALLATION
INITIAL SETUP:
Equipment Conditions:
Materials/Parts:
Fifth Wheel Towing Device in coupling
Packing ring (213630)
configuration.
Washer, lock (4) (MS35333-40)
Drycleaning solvent (item 14, WP 0085)
Tools/Test Equipment:
Rags (item 10, WP 0085)
Tool Kit, Mechanics General,
Brush, scrub (item 2, WP 0085)
NSN 5180-00-177-7033
Thread sealing compound
Shop Equipment, Common No. 1
General Safety Instructions:
NSN 4910-00-754-0654
None
REMOVAL
NOTE
All gladhands are removed the same way. Service gladhand shown.
1. Remove dummy coupling (1) from gladhand (2).
2. Remove two screws (3), arm lock (4), and chain assembly (5) from gladhand (2).
3. Remove gladhand (2) from tank fitting (6).
4. Remove retaining nut (7) from tank fitting (6). Remove tank fitting from mounting bracket (8).
5. Remove two screws (9), flatwashers (10), lockwashers (11), and nuts (12). Remove mounting
bracket (8) from fender. Discard lockwashers.
Figure 97. Gladhand Assembly
00053 00-1
