TM 9-2510-247-13&P
0051 00
REMOVAL
Remove screw (1) and washer (2) from loop clamp (3). Remove loop clamp from wiring harness.
REPLACEMENT/REPAIR
Wiring harnesses are not ordinarily removed except if they need to be replaced. Badly damaged wiring
harnesses must be replaced. Wiring harness connections must be tightly attached and connected. See
wiring schematics (WP 0088) for additional information.
INSTALLATION
Position loop clamp (3) around wiring harness and secure with screw (1) and washer (2).
Figure 96. Loop Clamp
Follow-on Tasks:
Check electrical system for proper operation.
END OF WORK PACKAGE
0051 00-2
