TM 9-2510-247-13&P
AIR BRAKE PROTECTION VALVE REPLACEMENT
REMOVAL, CLEANING, INSPECTION, INSTALLATION, LEAKAGE TEST
INITIAL SETUP:
Equipment Conditions
Materials/Parts
Air lines removed (WP 0055).
Washer, lock (4) (MS35333-40)
Drycleaning solvent (item 14, WP 0085)
Rags (item 10, WP 0085)
Brush, scrub (item 1, WP 0085)
Thread Seal Compound
Tools/Test Equipment
General Safety Instructions
Tool Kit, Mechanics General,
None
NSN 5180-00-177-7033
REMOVAL
1.
Remove two screws (1), lockwashers (2), nuts (3), and protection valve (4) from mounting
bracket (5). Discard lockwashers.
2.
Remove two screws (6), flatwashers (7), lockwashers (8), and nuts (9) from mounting
bracket (5). Discard lockwashers.
3.
Remove mounting bracket from fender.
Figure 98. Air Brake Protection Valve Assembly
0054 00-1
