TM 9-2510-247-13&P
0061 00
REMOVAL - Continued
NOTE
Tag all hoses prior to disconnecting.
1. Remove hydraulic hose from tube to boss connector (1).
2. Remove hydraulic hose from multiple connector (2).
3. Remove tube to boss connector (1) from oil filter assembly (3).
4. Remove multiple connector (2) from oil filter assembly (3).
5. Remove oil filter assembly (3) from bracket (6) by removing two screws (4) and
lockwashers (5) from bracket (6) and oil filter assembly (3). Discard lockwashers.
Figure 110. Oil Filter Assembly
NOTE
Use sealing compound on all threads before installing fittings.
INSTALLATION
1. Position oil filter assembly (3) on bracket (6) and
secure with two screws (4) and new lockwashers (5).
2. Install multiple connector (2) to oil filter assembly (3).
3. Install tube to boss connector (1) to oil filter assembly (3).
4. Connect hydraulic hose to multiple connector (2).
5. Connect hydraulic hose to boss connector (1).
0061 00-2
