TM 9-2510-247-13&P
0059 00
INSTALLATION
NOTE
Hydraulic hoses must not be uncapped and/or unplugged until ready to
connect to prevent contamination of hydraulic system.
Use sealing compound on all threads before installing fittings.
1.
Install straight adapter (16) to main valve assembly (13).
2.
Install tee pipe (6) to straight adapter (16).
3.
Install straight adapter (15) to tee pipe (6).
4.
Install pressure gauge (14) to straight adapter (15).
5.
Install main valve assembly (13) to frame.
6.
Install two screws (11) and new lockwashers (12).
7.
Install four flow restrictor valves and springs (18) to main valve parts (19).
8.
Install ten elbows (4) to main valve assembly (13).
9.
Install plug (17) to main valve assembly (13).
10. Install straight adapter (8) to main valve assembly (13).
11. Connect all wires to solenoids.
12. Install two screws (1) to solenoid cover (2) and install solenoid cover (2) to main
valve assembly.
13. Install screw (9) and ground wire (10) to main valve assembly.
14. Install hydraulic hose (7) to straight adapter (8).
0059 00-5
