TM 9-2510-247-13&P
0071 00
HINGE ASSEMBLY REMOVAL
1.
Remove 1 inch screw (1), lockwasher (2), and nut (3) from hinge mounting bracket (4) and tool
box door (5). Discard lockwasher.
2.
Remove 3/4 inch screw (6), lockwasher (2), and nut (3) from hinge mounting bracket (4) and
tool box door (5). Discard lockwasher.
3.
Remove weather strip (7) from tool box. Discard weather strip.
4.
Remove two screws (8), lockwashers (9), and nuts (10) from hinge mounting bracket (4) and
tool box. Discard lockwashers.
5.
Remove hinge assembly from tool box.
6.
Repeat steps 1 through 5 for remaining hinge assemblies.
HINGE ASSEMBLY INSTALLATION
1.
Position hinge mounting bracket (4) on tool box and secure with two screws (8), new
lockwashers (9), and nuts (10).
2.
Install new weather strip (7).
3.
Position hinge mounting bracket (4) on tool box door (5) and secure with 3/4 inch screw (6), 1
inch screw (1), new lockwashers (2), and nuts (3).
4.
Repeat steps 1 through 3 for remaining hinge assemblies.
Figure 122. Hinge Assembly for Tool Box
0071 00-3
