TM 9-2510-247-13&P
MAST FRAME ASSEMBLY PIVOT PIN REPLACEMENT
INITIAL SETUP:
Equipment Conditions:
Materials/Parts:
Fifth Wheel Towing Device in
Nut, self-locking (4) (MS17830-6C)
Personnel Required: 2
Tools/Test Equipment :
General Safety Instructions:
Tool Kit, Mechanics General,
None
REMOVAL
NOTE
There are two mast frame assembly pivot pins. Both are removed the same way.
1. Remove two screws (1) and locknuts (2) from pivot pin (3).
2. Remove pivot pin (3) from mast frame (4) and boom assembly (5).
INSTALLATION
1. Position boom assembly (5) on mast frame (4) to align holes and insert pivot pin (3).
2. Secure pivot pin (3) with two screws (1) and new locknuts (2).
Figure 123. Pivot Pin Replacement Assembly
Follow-on Tasks:
None.
END OF WORK PACKAGE
0072 00-1