TM 9-2510-247-13&P
0075 00
REMOVAL - Continued
8. Repeat steps 6 and 7 for remaining support foot.
9. Remove nut (15) from ball end bolt (16). Discard nut.
10. Remove spring pin (17) and flat washer (18) from
retaining pin (19). Discard spring pin.
11. Remove leg frame (13) from center link (20) and frame.
12. Repeat steps 10 and 11 for remaining leg frame.
13. Remove locknut (21) from ball end bolt (22). Discard locknut.
14. Remove center link (20) from transport leg bar (5).
15. Repeat steps 13 and 14 for remaining center link.
16. Remove 4.5 inch (114.3mm) screw (23) and 3 inch (76.2 mm) screw (24) from center link (20).
Remove center link.
INSTALLATION
1.
Position ball end bolt (22) on transport leg bar (5) and secure with new nut (21).
2.
Position ball end bolt (16) on leg frame (13) and secure with new nut (15).
3.
Repeat steps 1 and 2 for remaining ball end bolts.
4.
Position leg frame (13) on frame and secure with retaining pin (19), flatwasher (18), and new
spring pin (17).
5.
Repeat step 4 for remaining leg frame.
6.
Position support foot (14) on leg frame (13) and secure with retaining pin (12), flatwasher (11),
and new spring pin (10).
7.
Repeat step 6 for remaining support foot.
8.
Position transport leg bar (5) on frame.
9.
Position center link (20) on ball end bolt (22) and secure with 4.5 inch (114.3 mm) screw (23).
10.
Position center link (20) on ball end bolt (16) and secure with 3 inch (76.2 mm) screw (24).
0075 00-2
