TM 9-2510-247-13&P
0077 00
REMOVAL - Continued
1. With towing device coupled to prime mover, BOOM RETRACT to upright position.
2. Remove eight screws (1) from winch bracket (2).
3. BOOM EXTEND to lower boom to ground.
4. Relieve hydraulic pressure (WP 0056 00-5).
CAUTION
To prevent contamination of hydraulic system, cap and/or plug
hydraulic lines and ports after disconnecting lines.
NOTE
Mark hydraulic hoses prior to disconnecting.
5. Disconnect both winch hydraulic hoses.
6. Remove two elbows (3) from winch motor (4).
7. Remove four screws (5) from winch bracket (2) and winch assembly (6).
8.
Lift winch assembly (6) from bracket (2).
Figure 128. Winch Assembly
0077 00-2
