TM 9-2510-247-13&P
0077 00
CABLE ASSEMBLY REMOVAL - Continued
NOTE
If winch is inoperative, it can be removed only by cutting the cable.
Use a suitable container to catch fluid draining from hoses and fittings. Wipe
up any spillage with a rag.
1.
If winch can be operated, play out winch cable (1). If winch cannot be operated to play out
winch cable, cut cable (1) close to hex screw (2).
NOTE
Cable drum can be set up for clockwise or counterclockwise installation of
winch cable. To aid in installation, make note of cable anchor slot used to
secure cable on winch drum.
2.
Remove hex screw (2) and winch cable (1). Remove cable (1) from around hex screw (2), and
pull cable (1) from winch (3).
CABLE ASSEMBLY INSTALLATION
1.
Install cable (1) through cable anchor slot and around hex screw (2). Firmly seat hex
screw (2) in cable anchor slot of winch (3).
2.
Reel in winch cable.
Figure 129. Cable Assembly
Follow-on Tasks:
Test hydraulic system for leaks (WP 0056 00-5).
Check hydraulic fluid level (WP 0056 00-5).
Check winch for proper operation (WP 0013).
END OF WORK PACKAGE
0077 00-4
