TM 9--2520--215--34
0044 00--8
OUTPUT REDUCTION GEAR PLANETARY CARRIER ASSEMBLY REPAIR –
CONTINUED
0044 00
ASSEMBLY – Continued
7. Install planetary carrier spindle (4). Press planetary carrier spindle (4) until groove on side is aligned with lockpin
hole in output reduction gear carrier assembly (2).
NOTE
Two locating pins engage slotted end of planetary carrier spindle. When spindle is aligned
correctly for installation, lockpin groove is directly above lockpin hole in carrier.
8. Install lockpin (3) in hole in output reduction gear planetary carrier assembly (2). Press lockpin (3) 0.700 to 0.800
inch below surface of output reduction gear carrier assembly (2).
