TM 9--2520--215--34
0055 00--4
INPUT SCAVENGE OIL PUMP ASSEMBLY REPLACEMENT – CONTINUED
0055 00
INSTALLATION – Continued
3. Install scavenge pump gear (3) and nut (2) on pump shaft. Place a soft metal drift (9) between pump gear and
idler gear (10). Tighten nut (2) to 250 lb--ft. torque. Stake lip of nut (2) into two notches in pump drive shaft.
Remove drift.
NOTE
FOLLOW ON MAINTENANCE:
Install torque converter (WP 0059 00)
END OF TASK
