TM 9--2520--215--34
0057 00--1
INPUT PRESSURE OIL PUMP ASSEMBLY REPLACEMENT
0057 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0088 00)
Adapter remover (item 3, WP 0088 00)
Puller mechanical (item 12, WP 0088 00)
Torque wrench (item 29, WP 0088 00)
Torque wrench (item 34, WP 0088 00)
Socket wrench set (item 32, WP 0088 00)
Materials/Parts
Grease (item 2, WP 0085 00)
Nut (item 125, WP 0087 00)
Equipment Conditions
Torque converter removed (WP 0061 00)
REMOVAL
NOTE
If the input pressure pump was previously replaced there will not be a washer under the nut. The
lip (staked) of the nut portion will have to be removed from the pump shaft and the nut discarded.
1. Flatten tabs (1) on washer (2). Remove nut (3) and gear (4) from input pressure pump (5). Discard washer if
present.
