TM 9--2520--215--34
0056 00--4
INPUT SCAVENGE OIL PUMP ASSEMBLY REPAIR – CONTINUED
0056 00
ASSEMBLY – Continued
2. Install short ends of main drive gear (6) and main idler gear (7) into gear cavities of pump body (8). Align gears.
Shafts must be well seated in needle bearings.
3. Install dowel pins (11) into divider plate (3).
4. Install divider plate (3) over long ends of gear shaft (5). Be sure dowel pins (11) in plate are seated in holes in
pump body (8). Insert key (9) into keyway of main drive gear.
6
3
5
7
5
9
11
8
11
5. Install two pump idler gears (4). Engage keyway of one gear with key.
6. Install pump cover assembly (2). Make sure dowel pins of divider plate are seated in holes of cover. Install two
bolts (1). Torque bolts to 40--50 lb--ft.
4
2
1
4
NOTE
FOLLOW--ON MAINTENANCE:
Install input scavenge oil pump (WP 0055 00)
END OF TASK
