TM 9--2520--215--34
0068 00--6
TORQUE CONVERTER TURBINE SHAFT ASSEMBLY REPAIR – CONTINUED
0068 00
ASSEMBLY – Continued
NOTE
If repairing the XT--1410--4 perform installation steps 3 and 4. If repairing the XT--1410--5A
perform installation step 5.
3. Position ball bearing (6), snap ring side down into retainer (7).
4. Turn ball bearing (6) and retainer (7) over. Place ball bearing (6) and retainer (7) on flat press support in press.
Press intermediate--range sun gear (5) onto ball bearing (6).
5. Set new snap ring (8) on ball bearing (6) and set ball bearing (6) with new snap ring in press and press
intermediate--range sun gear (5) into ball bearing (6).
5
6
8
