TM 9--2520--215--34
0075 00--2
OUTPUT PRESSURE AND BRAKE COOLANT PUMP AND OUTPUT
DRIVESHAFT REPLACEMENT – CONTINUED
0075 00
REMOVAL – Continued
2. Remove 12 bolts (4) from right bearing retainer (5). Install three bolts (4) in tapped holes (6). Using three bolts
(4) as jacking screws remove retainer (5) and right bearing outer race as a unit.
3. Remove 12 bolts (7) from left bearing retainer (8). Remove retainer (8) and shims (9). Measure each shim with
micrometer caliper and record total shim pack thickness. Tie shims (9) together until assembly.
