TM 9--2520--215--34
0074 00--21
LOW-- AND REVERSE--RANGE PLANETARIES AND RELATED PARTS
REPAIR – CONTINUED
0074 00
ASSEMBLY – Continued
25. Install new main bearing locknut (7). Tighten main bearing locknut (7) to 350 lb--ft. Stake lip of main bearing
locknut (7) into four slots in carrier hub.
NOTE
Refer to WP 0022 00 for shimming, instructions in WP 0022 00 will determine if original shims
are to be reused or if different shim pack is required.
26. Install shims (6) and main bearing retainer (5), flat side down, onto main bearing support (2).
