TM 9--2520--215--34
0076 00--2
OUTPUT PRESSURE AND BRAKE COOLANT PUMP ASSEMBLY REPAIR –
CONTINUED
0076 00
DISASSEMBLY – Continued
NOTE
Do not remove bearings unless loose, damaged, or worn.
3. Remove bolt (6), flat washer (7) and press out two needle bearings (8) from output pressure pump cover
assembly (5).
4. Lift out two pressure pump gears (9) and remove key (10).
5
9
7
6
8
8
10
NOTE
Do not remove needle bearings unless replacement is necessary. If replacement is
necessary, bearings can be pressed out.
5. Remove three needle bearings (11) if necessary. Remove six cap screws (12), six lockwashers (13), and brake
coolant pump cover assembly (14). Discard lockwashers.
