TM 9--2520--215--34
TRANSMISSION HOUSING ASSEMBLY REPAIR CONTINUED
0079 00
ASSEMBLY Continued
5. Install two oil strainer screen assemblies (1) in circular openings at lower front transmission housing. Make sure
that the inner ends of the screen assemblies enter inner sockets and that screws are pushed into housing until
flush with front surface. Inspect after installation to be sure screens is not buckled.
6. On the XT--1410 5A transmission, press check valve (2) and new preformed packing (3), into opening on left front
of housing.
3
2
1
1
---5A MODEL
ONLY
NOTE
FOLLOW--ON MAINTENANCE:
Install torque converter assembly
(WP 0059 00).
Install left and right steer clutch housing as-
semblies (WP 0038 00)
END OF TASK
0079 00--7/8 blank