TM 9--2520--215--34
0080 00--1
OIL PRESSURE READINGS AND FUNCTIONAL TEST (TRANSMISSION
INSTALLED ON TEST STAND)
0080 00
THIS WORK PACKAGE COVERS:
Oil Pressure Readings, Functional Tests
INITIAL SETUP:
Tools and Special Tools
General mechanics tool kit (item 1, WP 0088 00)
Gauge, pressure indicating 0--60 psi (2)
Gauge, pressure indicating 0--300 psi (2)
(item 36, WP 0088 00)
Gauge, pressure indicating 0--400 psi (2)
Gauge, pressure indicating 0--120 psi (2)
Torque wrench (item 29, WP 0088 00)
Shift selector linkage and manual control
For shifting through all ranges
Steer control linkage and manual control
For operating steer control valve
External oil cooler
Parts kit (item 9,WP 0088 00)
Tools and Special Tools Continued
Control for varying the transmission input speed
(engine throttle or variable electric motor control)
Motor or engine of approximately 100 hp
Properly equipped test stand with a means for
driving a transmission motor or engine of
approximately 100 hp
Equipment Conditions
Vehicle parked and blocked
(TM 9--2350--256--10 or TM 9--2350--292--10)
References
TM 9--2350--256--10
TM 9--2350--292--10
OIL PRESSURE READINGS
NOTE
Data sample test log sheet is illustrated in this work package.
Use the oil pressures listed in the data test log sheets as normal values when testing the
transmissions.
All necessary oil pressure tests can be made concurrent with functional test outlined in functional
test and test data log.
During test conducted on a test stand parts kit must be installed to prevent loss of air pressure,
which maintains proper oil levels.
