TM 9--2520--215--34
0082 00--1
STEER CONTROL LINKAGE AND STEER OIL PRESSURE ADJUSTMENT
0082 00
THIS WORK PACKAGE COVERS:
Adjustment
INITIAL SETUP:
Tools and Special Tools
General mechanics tool kit (item 1, WP 0088 00)
Equipment Conditions
Vehicle parked and blocked
(TM 9--2350--256--10 or TM 9--2350--292--10)
STEER CONTROL LINKAGE ADJUSTMENT
1. With vehicle steer control in no steer position (centered); adjust steer control linkage so that steer position
indicator on steer control valve is centered. Steer position indicator is centered when it points directly to right side
of transmission.
2. Check left hand right steer position of vehicle steer control against positions of steer indicator. When vehicle steer
control is fully left, steer control indicator must be 30--1/2 degrees (from centered position) toward rear of
transmission. When vehicle steer control is fully right, steer position indicator must be 30--1/2 degrees (from
centered position) toward front of transmission.
3. If steer position indicator or vehicle steer control cannot be positioned properly, inspect linkage for binding, wear
and damage (TM 9--2350--256--20 or TM 9--2350--292--20).