TM 9--2520--215--34
0082 00--2
STEER CONTROL LINKAGE AND STEER OIL PRESSURE ADJUSTMENT –
CONTINUED
0082 00
STEER OIL PRESSURE ADJUSTMENT
1. Steer oil pressure can be increase by installing spacers (1) between spring (2) and cover (3).
2. Each spacer will increase steer supply pressure approximately 5--1/2 psi. No more than three spacers should be
installed. If pressure cannot be increased to proper level by installing three spacers, check spring for load. If
spring is not within specified load limits, replace with new spring. Refer to WP 0030 00 for disassembly and
assembly procedures.
1
2
3
END OF TASK
