TM 9--2520--215--34
0083 00--2
TORQUE CONVERTER LOCKUP SPEED AND MAIN OIL PRESSURE
ADJUSTMENT – CONTINUED
0083 00
MAIN OIL PRESSURE ADJUSTMENT
1. Main oil pressure can be raised by installing spacers (1) between spring (2) and plug (3).
2. Each spacer will raise main pressure approximately 20 psi. No more than two spacers should be added. If
proper main oil pressure cannot be obtained by installing two spacers, check spring for load. If spring is not within
specified load limits, replace with new spring.
3. Refer to WP 0029 00 for disassembly and assembly procedures.
3
1
2
END OF TASK
