TM 9--2520--215--34
0021 00--3
ADJUSTING DRIVE SHAFT PRELOAD – CONTINUED
0021 00
ADJUSTING DRIVE SHAFT PRELOAD – Continued
5. Using an inch--pound wrench (item 21, WP 0088 00) and splined wrench (item 25, WP 0088 00), rotate drive shaft
(3) slowly and record torque required to rotate it.
3
6. Gradually retighten spanner nut (2) against right bearing until all end--play is eliminated. Continue tightening
spanner nut until hole in nut, which is closest to slot in drive shaft, aligns with slot.
2
