FLUID HOSE
PART NO. 7-118-225
1
Hose Assembly
7-116-125
2
Hose
7-103-2
3
Connector Assembly
50-4360-7
4
Sleeve
20-4590
5
Stem
20-4586
6
Nut
20-4325
7
Seat
20-4585
CAUTION
Do not immerse hoses in solvent.
REASSEMBLY:
INSPECTION: Flex hose sideways while checking for
1.
Slide sleeves (4) on ends of hoses (2).
cracks. Check hoses for leaks under air pressure of 125
p.s.i.
2.
Screw stem (5) into sleeve (4).
REPAIR: Any hose which is split at the end can be cut
3. Insert setscrew (7) through nut (6) and screw seat
back as far as necessary with a sharp knife and the hose
(7) into sleeves (4).
connector attached to the new end.
4
