Using too much pressure will waste compound by
causing overspray and excessively thick coatings.
90 degree short tool into tailgate holes A and B and
spray in all directions.
d. Rustproofing Stake Pockets and Rubrail (see
(1) Insert long rigid tool into the base of each
stake pocket hole and spray while slowly withdrawing
(2) Use 90 degree short tool to spray the
interior surfaces of the rubrail (underneath the ledge),
Figure 13-5. Rustproofing Tailgate.
side, front, and tailgate. Cover these surfaces with an
Figure 13-6. Rustproofing Stake Pockets and Rubrail.
Insert 90 degree long tool into ends of vertical
reinforcements and spray in all directions while slowly
(1) Insert 90 degree short rigid tool into holes A
and B in cargo body bottom and spray in all directions.
(2) Use short rigid tool to completely cover the
bottom of the cargo body, including the open access
surfaces of the side and cross longitudinal sills.
Figure 13-7. Rustproofing Front Panel.