TB 43-0147
Table 3-4. Vehicles - Continued
Equipment and markings
Color
Placement
13.
Continued
center and corner squares in international
orange and the remaining 4 squares in
white. A red flag will be mounted on
vehicles
to
indicate
danger
when
considered necessary to caution personnel
of a hazardous condition in the area.
g. DA Label 76. Good Driver to
Display in all motor vehicles to be
promote good driving).
ready visible to the drive.
Requisition
through
normal
publication channels.
14.
Convoy markings as prescribed
Serial letter or number may be black
by FM 55-30.
on reflective signboard background
15.
Tactical markings (may consist of
Any appropriate color
As prescribed by commanders of
stripes geometrical figures other
major Army commands, any
simple designs, or naming of
changes must be approved by
individual vehicle). They will be
those commanders.
used to provide a more visible means of
identifying the vehicles of tactical units by
personnel of those units during tactical
operations. They will be of a suitable size
to facilitate identification from ground or
from a reasonable distance. They will be
designed to be as nearly unintelligible as
possible to enemy observation. Under no
circumstances will they in any way
represent the numerical designation or
distinctive insignia of any unit. Under actual
combat conditions, no written record will be
made or published on the system of tactical
markings used.
16.
Priority signs. They will be
On front and rear of vehicle. They
authorized by the area commander.
will lei( fabricated and mounted on
They are valid only
vehicles in accordance with TB
within the area under his
4G6-93-1 Vehicles under the
jurisdiction. Signs must not be
jurisdiction of NATO will comply
displayed when vehicle is not
with TB 34-9-249.
actually being used for a priority mission
and must be removed when no longer
required for that mission.
17.
Air recognization panels.
Red fluorescent on one side and
Marked as directed by the appropriate
yellow fluorescent on the reverse
major commander as to the
side.
arrangements and conditions under which
they will be used. It will draped on vehicle
in a standard unchanging pattern different
from displays prescribed for other
recognition purposes such as front lines,
targets, etc . Size: 6' by 2''3", each panel
having a tie cord of adequate length in each
corner.
18.
Commercial design vehicle
Similar to markings used on military design
markings. Unless otherwise
vehicles
specified, vehicles assigned to TOE or TD
units, or to other organizations and activities
for nonadministrative use.
3-16
