TB 43-0213
NOTE
In some shop applications, it may be
desirable to operate two spray guns from
the same material pump. In such instances,
a tee may be used at the outlet port of the
material filter instead of a direct material
hose connection. The multiple material
hoses are then connected to the two outlet
parts of the tee.
(2) Connect the material hose (black hose) to
the outlet port of the material filter.
(3) Connect the opposite end of the material
hose to the handle of the gun(s).
TA504763
Figure 3-11. Typical Spray Gun System.
TA504765
Figure 3-13. Material Filter
(Direct Mounting).
NOTE
Depending on the installation, the spray gun
handle may be equipped with a Z swivel to
provide greater maneuverability.
f. Once the spray gun system has been connected, .
refer to paragraph 3-8 for information concerning
choice of wands, wand extensions, and assembly to the
TA504764
spray gun.
Figure 3-12. Material Filter
(Remote Mounting).
3-16
