TB 43-0213
Table 3-5. Troubleshooting Material Pumps (Con't).
e. The following is a typical installation procedure
c. Commercial literature is available upon request
for a rustproofing material spray gun system:
from each of the suppliers of material spray guns,
wands, and attaching hardware and hoses, as listed in
Table 3-2. This available literature also provides
WARNING
repair instructions.
and
maintenance
specific
Make certain pump motor is turned off and
d. There are two ways of mounting material filters to
all air lines have been purged of pressure
the system (see Figure 3-12 and Figure 3-13). There is
before installing spray gun assembly.
no difference in performance from one mounting
position to another; however, with remote mounting,
(1) Connect the material filter to the output
the added weight on the hose reduces the ease of
port of the air motor pump, directly or remotely,
handling and increases the chance of damaging the
depending on the model.
filter.
3-15
