TB 5-2520-551-24
W-33 VEHICLE CABLE ASSEMBLY (cont.)
85.
diagonal cutting pliers.
86.
Strip insulation from both ends of the engine temperature sensor wires.
87.
wire with splice (item 89, M7928/5-4) using crimping tool.
88.
Cut -12V alternator wire located behind roadside alternator using diagonal
cutting pliers.
89.
Strip insulation from ends of -12V alternator wire.
Connect ends of -12V alternator wire to W33 12V ALTNTR (NEG) wire with
90.
splice fastener (item 89, M7928/5-4) using crimping tool.
Using 10 mm wrench, connect W33E2 to ground terminal post on roadside
91.
Tighten nut on ground terminal post.
92.
Using cable ties, secure W-33 vehicle cable (item 29, C5110787-1) away from
exhaust manifold along with existing routed wires and fasteners.
27