TB 5-2520-551-24
W-65 SPEED CONTROL CABLE ASSEMBLY (cont.)
NOTE
There are two wires on terminals A3TB2-3 and A3TB2-5.
108. Using 3/16" flat tip screwdriver, connect six wires from W-65 cable (item
31, C5118955-1) (TB1-1 through TB1-6) to terminal block TB1 of RPM
Observe wire band markers for proper
regulator (item 32, C5122557-1).
installation.
109. Using 3/16" flat tip screwdriver, connect six wires from W-65 cable (item
31, C5118955-1) (TB2-1 through TB2-6) to terminal block TB2 of RPM
regulator (item 32, C5122557-1). Observe wire band markers for proper
installation.
110. On dashboard, install two U-nuts (item 51, C5131383-1) to RPM regulator
mounting holes.
111. Install RPM regulator assembly (item 32, C5122557-1) and secure with two
screws (item 50, MS51959-70B) using NO.2 cross tip screwdriver.
32