W-65 SPEED CONTROL CABLE ASSEMBLY (cont.)
TB 5-2520-551-24
102. Remove and retain retaining nut from toggle switch barrel using 9/16"
combination wrench. Remove switch from mounting hole in lockout assembly
housing.
103. Connect W65S1 and W65S2 to transfer case lockout switch (terminals 1 and 2)
using 3/16" flat tip screwdriver. Secure W-65 cable (item 31, C5118955-1)
with tiedowns (item 73, MS3367-2-0) using tiedown tool.
NOTE
The spring-loaded toggle switch is a normally-open
Ensure switch toggle lever is in an upward
switch.
For proper operation,
position when door is open.
listen for an audible click when closing door.
104. Place switch through mounting hole in housing. Reinstall retaining nut and
tighten using 9/16" combination wrench.
30
