TM 9-2510-247-13&P
24-VOLT RECEPTACLE REPLACEMENT
REMOVAL AND INSTALLATION
INITIAL SETUP:
Equipment Conditions
Materials/Parts
Fifth Wheel Towing Device in coupling
Washer, lock (2) (MS35333-40)
configuration (WP 0002).
Tag, Marker (item 15, WP 0085)
Disconnect Batteries (WP 0050).
Tools/Test Equipment
General Safety Instructions
Tool Kit, Mechanics General,
Remove all power to towing device prior to
NSN 5180-00-177-7033
making any repairs on the electrical system.
Shop Equipment, Common No. 2
NSN 4910-00-754-0650
REMOVAL
WARNING
Remove all power to fifth wheel towing device prior to making any repairs on the electrical
system. Failure to do so may result in serious injury or death.
1. Disconnect the receptacle (9) to terminal cable (1) at terminal (2).
2. Remove two nuts (3), two lockwashers (4), one flatwasher (5), one grounding cable (6), two
screws (7), and two flat washers (8). Discard lockwashers.
3. Remove receptacle (9) from junction box (10).
4. Pull rubber boot (11) down cable (1) and disconnect wire cable (1) from receptacle (9) by
Figure 75. Receptacle Box
0041 00-1
