TM 9-2510-247-13&P
12-VOLT RECEPTACLE REPLACEMENT
REMOVAL, INSTALLATION
INITIAL SETUP:
Equipment Conditions
Materials/Parts
Fifth Wheel Towing Device in coupling
Marker tags (item 15, WP 0085)
configuration (WP 0002).
Washer, lock (2) (MS35333-40)
Disconnect batteries (WP 0050).
Tools/Test Equipment
General Safety Instructions
Tool Kit, Mechanics General,
Remove all power to towing device prior to
NSN 5180-00-177-7033
making any repairs on electrical system.
REMOVAL
WARNING
Remove all power to fifth wheel towing device prior to making
any repairs on the electrical system. Failure to do so may result
in serious injury or death.
NOTE
Mark and tag all wires prior to disconnecting.
There are two 12-volt receptacles, one on 12/24 volt junction box and
one on electrical control box. Both are removed the same way.
1. Remove two screws (1), flatwashers (2), lockwashers (3), and nuts (4) and remove
receptacle (5). Discard lockwashers.
2. Loosen seven screws (6) and remove wires from receptacle (5).
Figure 76. Plug Assembly
0042 00-1
