TM 9-2510-247-13&P
0066 00
REMOVAL - Continued
Figure 116. Boom Extension Cylinder Assembly
WARNING
With power off, position control levers to the EXTEND and RETRACT positions to
relieve hydraulic pressure before removing hoses. Failure to comply may result in
severe injury or death to personnel.
Spilled hydraulic oil is very slippery. Be careful when entering or working in area.
Wipe up any spilled oil immediately. Failure to comply may result in severe injury
or death to personnel.
4.
Remove hydraulic hoses from two fittings (3).
5.
Remove fittings (3) from cylinder.
6.
Remove one roll pin (4) and flatwasher (5) from retaining pin (6). Discard roll pin.
7.
Remove retaining pin (6) from boom extension assembly (7).
CAUTION
Boom extension assemblies are heavy and require the aid of an assistant to
remove/install.
8.
Remove boom extension (8) from boom.
9.
Remove two screws (9) from boom extension (8) and remove cylinder (10) from boom
extension (8).
0066 00-2
