TM 9-2510-247-13&P
0068 00
REMOVAL WHEEL STOP HANDLE - Continued
(3)
Remove split pin (11) from rod (10).
(4)
Remove rod (10) from wheel stop handle assembly and spring (12).
(5)
Remove spring (12) and washer (13) from wheel stop handle assembly.
INSTALL WHEEL STOP HANDLE
(1)
Position spring (12) and washer (13) in wheel stop handle assembly.
(2)
Install rod (10) through wheel stop handle assembly and spring (12) and secure with split pin (11).
(3)
Position handle (8) on wheel stop handle assembly and secure with split pin (9).
Figure 117. Receiver and Wheel Stop
INSTALLATION
NOTE
There is a driver side and a passenger side receiver. Both are installed the same way.
(1) Position receiver (4) on boom and lock handle (8).
(2) Install tee bolt (7) and tee bolt (6) on receiver (4).
(3) Install split pins (5) onto tee bolts (6) and (7).
(4) Position wheel stop (3) on receiver (4) and secure with spring pin (1) and hitch pin (2).
Follow-on Tasks:
Check for proper operation.
END OF WORK PACKAGE
0068 00-2
