TM 9-2510-247-13&P
RECEIVER AND WHEEL STOP ASSEMBLY REPLACEMENT
INITIAL SETUP:
Equipment Conditions
Materials/Parts
Fifth Wheel Towing Device in coupling
Pins, split (4) (98296A255)
configuration (WP 0002).
Pins, split (4) (98296A559)
Tools/Test Equipment
Personnel Required 2
None
General Safety Instruction
None
NOTE
There is a driver side and a passenger side receiver. Both are removed the same way.
REMOVAL
1. Remove spring pin (1) from hitch pin (2) and remove hitch pin (2) and wheel stop (3) from
receiver (4).
2. Remove split pins (5) from tee bolts (6) and (7).
3. Remove tee bolts (6) and (7) by turning in toward receiver (4).
4. Lift handle (8) and remove receiver (4) from boom.
REMOVE WHEEL STOP HANDLE
1. Remove split pin (9) from rod (10).
2. Remove handle (8) from wheel stop handle assembly.
Figure 117. Receiver and Wheel Stop
0068 00-1
