TM 9-2510-247-13&P
0066 00
INSTALLATION
CAUTION
Boom extension assemblies are heavy and require the aid of an assistant to
remove/install.
1. Install cylinder (10) in boom extension (8) and secure with two screws (9).
2. Install boom extension (8) in boom and secure with retaining pin (6), new roll pin (4), and
flatwasher (5).
3. Using the cylinder alignment tool, align cylinder to install fittings (3).
4. Install retaining pin (6) through boom extension assembly (7) and secure with flatwasher (5)
and new retaining pin (4).
5. Install hydraulic hoses on two fittings (3).
6. BOOM RETRACT to raise boom to approximately 45 angle to allow for installation of slip pad.
7. Position slip pad (2) and secure with four screws (1).
Follow-on Tasks:
Charge hydraulics (WP 0056 00-5).
END OF WORK PACKAGE
0066 00-3
