TM 9--2520--215--34
0027 00--1
STEER CONTROL VALVE ASSEMBLY REPAIR
0027 00
THIS WORK PACKAGE COVERS:
Disassembly, Cleaning, Inspection, Fit and Wear Limits, Assembly
INITIAL SETUP:
Tools and Special Tools
General mechanics tool kit (item 1, WP 0088 00)
Torque wrench (item 29, WP 0088 00)
Torque wrench (item 31, WP 0088 00)
Materials/Parts
Retaining ring (item 1, WP 0087 00)
Retaining ring (4) (item 2, WP 0087 00 )
Preformed packing (3) (item 3, WP 0087 00)
Preformed packing (2) (item 4, WP 0087 00)
Gasket (2) (item 5, WP 0087 00)
Sealing compound (item 22, WP 0085 00)
Self--locking nut (2) (item 126, WP 0087 00)
Equipment Conditions
Steer control valve assembly removed
(WP 0026 00)
NOTE
Perform Disassembly steps 1 through 4 and 6 and Assembly steps 1, 2 and 4 through 8 and
11 through 14 for maintenance of the XT--1410--4 transmission.
Perform Disassembly steps 1 through 3, 5 and 6 and Assembly steps 1, 3 through 7, and 9
through 14 for maintenance of the XT--1410--5A.
DISASSEMBLY
NOTE
Do not disassemble detent plug assembly. If plug or ball is damaged or if spring tension is
weak, replace entire unit.
1. Remove steer detent plug assembly (1) from steer control valve body (2). Remove retaining ring (3) and steer
position indicator (4). Discard retaining ring.
1
2
4
3