TM 9--2520--215--34
0027 00--3
STEER CONTROL VALVE ASSEMBLY REPAIR – CONTINUED
0027 00
DISASSEMBLY – Continued
NOTE
Do not disassemble valve assemblies unless parts replacement is necessary. Perform step 4
or 5 only if replacement is necessary.
4. On the XT--1410--4 transmission, remove nut (10), detent plunger (11) and two inner and two outer steer control
compression springs (12 and 13) from each steer control valve (9).
10
11
9
12
13
NOTE
The XT--1410--5A transmission contains only one spring, a jam nut, and a self--locking nut on
each steer control valve assembly and they are not interchangeable with those used on the
XT--1410--4 transmission.
5. On the XT--1410--5A transmission remove self--locking nut (14), jam nut, (10), detent plunger (11) and steer
control compression spring (12) from each steer control valve (9). Discard self--locking nut.
10
11
9
14
12
