TM 9--2520--215--34
0039 00--23
STEER CLUTCH HOUSING ASSEMBLY REPAIR – CONTINUED
0039 00
ASSEMBLY – Continued
28. Using two 5/16--24 flat head screws to grip apply ring (22) assembly, install apply ring assembly (22), seal--ring
side up, onto inner hub of housing (4). Install spacer (25) onto bearing (26) of apply ring assembly (22).
22
25
4
26
29. Install four Belleville springs (24), beginning by installing first one, convex side down. Install the second spring
concave side down: the third one, convex side down; and fourth one, concave side down, Install spacer (23) onto
Belleville spring (24).
24
23
