TM 9--2520--215--34
0039 00--20
STEER CLUTCH HOUSING ASSEMBLY REPAIR – CONTINUED
0039 00
ASSEMBLY – Continued
21. Install new preformed packing (30) in outer grooves of steer--clutch apply ring (22).
30
22
NOTE
On the XT--1410--5A transmission, install expander so ends curve away from seal.
22. Install expander (29) into piston (28) groove. Install new Teflon seal ring (27) carefully on top of expander (29).
Place a portion of seal in steer clutch piston ring (28) groove. Work remainder of seal in ring groove.
CAUTION
Use care to prevent seal from popping out of piston ring groove.
23. Before installing piston (28) and new Teflon seal ring (27) assembly, coat new Teflon seal ring (27) with petrolatum
technical, then work steer clutch piston (28) and seal ring (27) into bore.
28
29
27
