TM 9--2520--215--34
0039 00--25
STEER CLUTCH HOUSING ASSEMBLY REPAIR CONTINUED
0039 00
ASSEMBLY Continued
33. Rotate steer--clutch drive gear (17) until 12 holes in gear align with tapped holes in steer clutch piston under it.
Install 12 spacers (21) into holes in gear (17).
17
21
34. Install steer clutch pressure plate (16), grooved side up. Align plate (16) holes with gear holes. Install twelve new
self--locking screws (15). Torque screws to 19 to 23 lb--ft.
NOTE
Slots in screws heads must not align with grooves in pressure plate.
35. Stake each screw (15) head at two points into groove in steer clutch pressure plate (16).
16
15