TM 9--2520--215--34
0039 00--16
STEER CLUTCH HOUSING ASSEMBLY REPAIR – CONTINUED
0039 00
ASSEMBLY – Continued
7. Install new dowel pin (42). Drive dowel pin into housing (4) until seated firmly. Stake metal of housing over end of
pin to retain it.
4
42
8. Install elbow (44) into threaded hole in housing (4) near sleeve (49). Tighten elbow until tube fitting end is parallel
with mounting face of housing.
9. Install tube assembly (43), plain end first, into internal bore of housing (4). This bore aligns with dowel pin.
Connect nut end of tube assembly to elbow (44). Tighten nut.
49
4
44
43
