TM 9--2520--215--34
0039 00--19
STEER CLUTCH HOUSING ASSEMBLY REPAIR – CONTINUED
0039 00
ASSEMBLY – Continued
NOTE
Only right--side steer housing is to have steer tie shaft idler bearing race.
19. Install steer drive shaft tie shaft and tie shaft idler bearing outer race in housing.
20. Install steer--clutch lubrication valve (32). Place valve, grooved end outward, against steer--clutch piston (28).
Insert new pin (33). Support head of pin and peen small end into piston inner face countersink.
33
32
28
