TM 9--2520--215--34
0041 00--5
BRAKE APPLY REACTION PLATES AND RELATED PARTS REPAIR –
CONTINUED
0041 00
ASSEMBLY
1. Install new bearing (9). Coat new bearing (9) with white lead. Press numbered end of bearing (9) only. Locate
bearing (9) centrally in bore.
2. Install two new seals (11) so that seal lips face away from needle bearing (9). Press two seals (11) into bore until
within approximately 1.16 inch of bearing.
3. Install new preformed packing (10) into second counterbore of brake apply shaft bore.
4. Install needle bearing assembly (13) in first counterbore. Coat needle bearing (13) with white lead and seat
against shoulder of bore in saddle (12).
5. Install one new preformed packing (18) against sleeve (15). Install the other new preformed packing (18) into
groove.
6. Align bolt holes in sleeve (15) with those in saddle (12). Position sleeve (15) so that straight edges of flange are
toward top and bottom of saddle (12).
9
11
12
5
7
8
7
10
13
3
18
16
17
4
LEFT SIDE ONLY
15
4
20
